Difference between revisions of "Arduino"
From Proview Wiki
(Created page with "<p>Proview has support for:</p> <ul> <li> Arduino Duemilanove (/dev/ttyUSB0)</li> <li> Arduino UNO (/dev/ttyACM0)</li> <li> Arduino Mega 2560 (/dev/ttyACM0)</li> </ul> <p>The ...") |
|||
| Line 1: | Line 1: | ||
| − | + | Proview has support for:<br /> | |
| − | + | * Arduino Duemilanove (/dev/ttyUSB0)<br /> | |
| − | + | * Arduino UNO (/dev/ttyACM0)<br /> | |
| − | + | * Arduino Mega 2560 (/dev/ttyACM0)<br /> | |
| − | + | ||
| − | + | The software needed to upload the sketch is a part of The Debian/Ubuntu repository.<br /> | |
| − | + | On ubuntu: '''$sudo apt-get install arduino''' <br /> | |
| − | + | ||
| − | + | Important:<br /> | |
| − | + | ||
| − | + | * Don't run Proview on a virtual machine if you want to use the Arduino<br /> | |
| − | + | ||
| − | + | * The running user must be in the dialout group | |
| − | + | ** Check in a terminal: '''$groups''' | |
| − | + | *** If the user is not a part of the dialout group: '''$sudo usermod -a -G dialout <user>''' | |
| − | + | * The user should have r/w access to the device | |
| − | + | ** Check in a terminal (UNO/Mega): '''$ls -la /dev/ttyACM0''' | |
| − | + | * Use the Arduino sketch from the installed Proview release | |
| − | + | ** From release v4.8.4 and higher, the Arduino sketch is in: /usr/pwr48/os_linux/hw_x86/exp/inc/pwr_arduino_uno.ino | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Latest revision as of 03:37, 27 August 2013
Proview has support for:
- Arduino Duemilanove (/dev/ttyUSB0)
- Arduino UNO (/dev/ttyACM0)
- Arduino Mega 2560 (/dev/ttyACM0)
The software needed to upload the sketch is a part of The Debian/Ubuntu repository.
On ubuntu: $sudo apt-get install arduino
Important:
- Don't run Proview on a virtual machine if you want to use the Arduino
- The running user must be in the dialout group
- Check in a terminal: $groups
- If the user is not a part of the dialout group: $sudo usermod -a -G dialout <user>
- Check in a terminal: $groups
- The user should have r/w access to the device
- Check in a terminal (UNO/Mega): $ls -la /dev/ttyACM0
- Use the Arduino sketch from the installed Proview release
- From release v4.8.4 and higher, the Arduino sketch is in: /usr/pwr48/os_linux/hw_x86/exp/inc/pwr_arduino_uno.ino
