Arduino

Proview has support for:

• Arduino Duemilanove (/dev/ttyUSB0)
  
• Arduino UNO (/dev/ttyACM0)
  
• Arduino Mega 2560 (/dev/ttyACM0)
  

The software needed to upload the sketch is a part of The Debian/Ubuntu repository.
On ubuntu: $sudo apt-get install arduino

Important:

• Don't run Proview on a virtual machine if you want to use the Arduino
  

• The running user must be in the dialout group
  • Check in a terminal: $groups
    • If the user is not a part of the dialout group: $sudo usermod -a -G dialout <user>
• The user should have r/w access to the device
  • Check in a terminal (UNO/Mega): $ls -la /dev/ttyACM0
• Use the Arduino sketch from the installed Proview release
  • From release v4.8.4 and higher, the Arduino sketch is in: /usr/pwr48/os_linux/hw_x86/exp/inc/pwr_arduino_uno.ino